HVAC Counter Flow Plate Heat Exchanger as Heater or Cooler
HVAC, acronym for Heating, Ventilation, and Air Conditioning, alters the temperature of the targeted fluid by forcing the cold side fluid into a compressor, increasing or decreasing its pressure, and leading it into either giving away or taking in the heat from the other पक्ष।
Jiema HVAC Counter Flow Plate Heat Exchanger as Heater or Cooler is proved to be one of the most practical heaters in China and welcomes itself into oversea markets such as Mideast, South America, Asia,Africa, and so on.
Drawing of Counter Flow प्लेट हीट एक्सचेंजर
Introduction to Plate Heat Exchanger Plate&Gasket
1 । Fillets in the Plate Heat Exchanger Sizing Spreadsheet are of “Interlocked” structure which allows for mutual interlocking of sheets.
2 .Design of large-angle ripples can raise heat transfer coefficient with fairly great reduction of resistance.
3 .Design of small-angle ripples allows for reduction of degradation resistance and is featured by fairly low heat transfer coefficient.
4 .Appropriate sheet type should be reasonably selected according to the parameters of working conditions at the time of design selection so as to achieve the best application effect of the Counter Flow Plate Heat Exchanger .
5 .Upper guide bar is designed with double slopes, which can improve stability of the sheets.
Introduction to Sealing Gasket
Sealing gasket is inserted and fixed to the slot in Plate Heat Exchanger Flow Sheet , featuring easy insertion and replacemen t. It can substantially reduce stoppage time. Sealing function is separated from fixing function. Even if some “clamps” with fixing function fail, the gasket can still have sealing function in the slot.
|
Material Description
|
Code
|
Applicable Temperature (ºC)
|
Anti-corrosive Performance and Applicable Occasions
|
|
NBR
|
N
|
-20~110
|
Hot air, water, non-polar oil, mineral
oil, lubricant and silicone oil, etc.
|
|
EPDM
|
E
|
-50~150
|
Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc.
|
|
Fluorine Rubber
|
F
|
0~180
|
Inorganic acid, alkali, mineral oil and
Haloalkane, etc.
|
|
Silicon Rubber
|
Q
|
-65~230
|
Resistant to cold current and dry hot
|
सामान्य प्रश्न
1. Do you sell spares/accessories?
हाँ। We not only provide our customers wit spares/accessories for replacement, but also manufacture them by ourselves.
2. How Heat exchangers are manufactured?
Heat exchangers are produced by pressing thin metal sheets into corrugated shape, then stacking and fixing them with clamping bolts in a frame. We are manufacturers with our own steel mould.
◎10 years experience in heat exchanger and pressure vessel
◎2 production bases in Guangzhou and Hubei
◎5 Export markets including Asia,Mideast,Africa,South America,America
◎Strong technician team of 5 senior engineers who have over 15 years experience in heat transferring study
Contact Now
